Results 1 to 3 of 3

Thread: socket assembly question

  1. #1
    Join Date
    Jun 2013
    Location
    Antwerp/Belgium
    Posts
    9
    Rep Power
    0

    Default socket assembly question

    Iíve changed the V5 reverb tube, but at first it didnít came loose. I had to unscrew and remove the tube shielding base plate from the chassis.
    My question is: how is the tube socket mounted on the inside of the chassis? i.e. is it secured by the same screws from the shield base plate or is the socket assembled with separate (inside chassis) screws?

    Thanks for reading.

  2. #2
    Join Date
    Feb 2007
    Location
    North Hollywood, CA
    Posts
    610
    Rep Power
    10

    Default

    It's mounted to the PC board, so it isn't going to move. Sometimes if you twist the tube shield the wrong way it get's stuck to the shield base.
    Dave Phelge
    Chief Misconception Eradicator
    support@fryette.com

    "We are what we pretend to be, so we must be careful what we pretend to be". - Kurt Vonnegut

  3. #3
    Join Date
    Jun 2013
    Location
    Antwerp/Belgium
    Posts
    9
    Rep Power
    0

    Thumbs up

    Thank you for enlightening me.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •