Results 1 to 5 of 5

Thread: Very quick attempt at a Fryette-ish sound from a digital modeler...thoughts?

  1. #1

    Default Very quick attempt at a Fryette-ish sound from a digital modeler...thoughts?

    http://www.tonefinder.com/index.php?...id&value=12801

    I used two of the P50E impulses made by reneisgod from the Ultimate Metal forums, along with LePou LeXtac and TS-999.

    EDIT: Here's another one that I just did, with a different guitar:
    http://www.tonefinder.com/index.php?...id&value=12803

    2nd EDIT: I added Reason bass and drums to the second clip: http://www.tonefinder.com/index.php?...id&value=12805
    Last edited by WarriorOfMetal; 03-19-2012 at 12:53 AM.

  2. #2
    Join Date
    Jan 2012
    Location
    St Helens, Or
    Posts
    5
    Rep Power
    0

    Default

    doodly-doo-doo-tik-tok....

    Sounds great. Better in the mix, maybe a little fuzzy stand alone. I hear almost a 5150 sort of tone.

  3. #3
    Join Date
    Jun 2011
    Location
    Seattle
    Posts
    348
    Rep Power
    0

    Default

    I think it sounds pretty good ..... the top is not as smooth as I think of Fryette.
    The fact that Stephen appears from nowhere, is sentenced to death in an emotional public trial without anyone interfering at all and is then altogether forgotten as if nothing happened, is already suspicious.

  4. #4

    Default

    I did some reading...it seems that the impulses I used were made from an FB212 cab, but the stock P50Es had been replaced with V30s....oops.

    Does anyone know where I can find some P50E impulse responses?

  5. #5

    Default

    I've hunted P50 impulses myself and found nothing. RedWirez have IRs from a Soldano cab with Eminence Legend V12s, though, which are arguably closer than V30s.
    Guitars: ESP Horizon / Gibson Les Paul / G&L SC-2
    FX & Bits: Boss NS-2, MXR M-108 EQ, Koch Dummy Box, Klotz cable
    Amp: Pittbull 100 CL EQ, Framus 2x12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •