Search:

Type: Posts; User: metalhobo

Page 1 of 3 1 2 3

Search: Search took 0.35 seconds.

  1. Replies
    1
    Views
    34

    Regarding the signal level between the preamp and...

    Regarding the signal level between the preamp and power amp, there are really only three factors that you have to watch out for: noise, saturating the front-end of the power amp, and overloading the...
  2. Replies
    7
    Views
    2,396

    I have fun telling people it's a sixty watt amp...

    I have fun telling people it's a sixty watt amp then turning the gain to one o'clock.
  3. Replies
    7
    Views
    2,396

    been running my D60 bored out, gain II on max and...

    been running my D60 bored out, gain II on max and gain I to fit the style, anywhere from 2 o'clock to maxed. for recording I'll dial the gain down.

    master around 11 for band practice. no earplugs...
  4. Replies
    45
    Views
    16,867

    what cab/speakers? those gain settings are...

    what cab/speakers?

    those gain settings are pretty wild. I myself have found that "less" mode can still be useful for high gain sounds. just dime gain II, and the sound takes on a very round,...
  5. Replies
    2
    Views
    879

    http://www.fryette.com/lxii-stereo-power-amp/

    http://www.fryette.com/lxii-stereo-power-amp/
  6. Replies
    2
    Views
    767

    replacing the power tubes is usually the first...

    replacing the power tubes is usually the first stop after checking normal things like cables and fuses (it doesn't sound like either of those). harshness and hum are both potential symptoms of...
  7. Replies
    2
    Views
    553

    Can't comment about the Metro loop but try...

    Can't comment about the Metro loop but try checking your spam folders or maybe resending an email to Fryette. I've only ever gotten quick responses from them.
  8. Replies
    4
    Views
    659

    Very nice. Got any samples of recorded stuff?

    Very nice. Got any samples of recorded stuff?
  9. Replies
    3
    Views
    729

    Measure the anode to cathode voltage. Set the...

    Measure the anode to cathode voltage. Set the bias current so that the quiescent dissipated power for each tube is not higher than (rule of thumb) approximately 75% of the tube's rated power. An...
  10. Replies
    6
    Views
    1,143

    You're right, I think I remember something about...

    You're right, I think I remember something about a clean channel tweak after the very first models. I think it had to do with people complaining that the clean channel wasn't clean enough. Maybe I'm...
  11. Replies
    6
    Views
    1,143

    Sig:X dirt cheap? Where? I don't think there...

    Sig:X dirt cheap? Where?

    I don't think there have been any major revisions to the Sig:X, but I may be wrong. I know the Deliverances suffered a revision which made them more sponge-y sounding,...
  12. Looking forward to it! I think you'll be...

    Looking forward to it!

    I think you'll be pleased with the relative ease of your refurbishment. For a PCB amp (which I prefer), VHTs I've found are fairly easy to break down. At least, that's been...
  13. On mine the channel volumes are identical......

    On mine the channel volumes are identical... however, I can imagine various factors which would lead to a volume difference while not necessarily indicating malfunction: wide volume pot tolerance...
  14. Replies
    3
    Views
    1,784

    I should think not... the Power Station seems to...

    I should think not... the Power Station seems to be doing well, the first run of the GP/DI is apparently almost ready to ship out, they were able to represent themselves at NAMM, and Steve seems to...
  15. Thread: Class A/AB

    by metalhobo
    Replies
    1
    Views
    876

    In class A mode the tubes are cathode biased, so...

    In class A mode the tubes are cathode biased, so yes the bias pot should have no effect.
  16. Replies
    2
    Views
    1,419

    I love my TS-808 clone with my D60. It's exactly...

    I love my TS-808 clone with my D60. It's exactly what you describe -- tight and crunchy. Not something I keep on all the time, but it's definitely very useful for pushing things over-the-top.
  17. Replies
    4
    Views
    1,258

    Deliverance II

    Guess it's official...

    http://www.fryette.com/deliverance-series-heads-and-cabinets/
  18. Replies
    10
    Views
    2,843

    Copper art is my favorite kind of art.

    Copper art is my favorite kind of art.
  19. Replies
    6
    Views
    1,072

    If you buy some new tubes and it still doesn't...

    If you buy some new tubes and it still doesn't work, then just keep the tubes and send back the amp. No money lost, as you'll need those tubes for your other amp eventually. And if it does fix the...
  20. Replies
    6
    Views
    1,072

    60% of the time it's the tubes, all the time.

    60% of the time it's the tubes, all the time.
  21. Replies
    23
    Views
    5,762

    In the grand scheme of things the cab is...

    In the grand scheme of things the cab is absolutely more important. I don't mean that the cabinet construction has more impact on the sound than the driver, but that you can exercise more control...
  22. Replies
    23
    Views
    5,762

    I have a 2x12 with a V30/K100 that sounds great...

    I have a 2x12 with a V30/K100 that sounds great with my D60. Doesn't sound anything like my D412 but it still sounds good. If you're looking for something with a midscoop then the K100 is a pretty...
  23. Replies
    4
    Views
    1,830

    footswitchable less/more, I've heard. I dunno,...

    footswitchable less/more, I've heard.

    I dunno, I'm kind of ambivalent about this. The Deliverance is perfect in its simplicity. Even though the sound isn't supposed to change, adding features...
  24. Can you post the pictures?

    Can you post the pictures?
  25. Replies
    5
    Views
    1,715

    http://www.fryette-users.com/forums/showthread.php...

    http://www.fryette-users.com/forums/showthread.php?3234-why-the-quot-newer-quot-Deliverance-don%C2%B4t-have-a-Choke-anymore
Results 1 to 25 of 57
Page 1 of 3 1 2 3